When we know that the cold is coming, it is better to start preparing. We must decide what type of heating we are going to implement or we have to put together a list of what we are missing at home. And thinking about heating means thinking about a budget that we will have to spend. Knowing our needs and spaces is the basis for making a good decision.
The cold arrives and we have to find a balance between having a cozy and heated house and the bill that we will have to pay for it. A good combination so that our pocket does not suffer to the extreme. The object is to achieve maximum effectiveness.
What we must keep in mind is that nowadays we have the facility to be able to buy all our supplies and equipment from the comfort of the house. We do not need to run out of the house to look for stores, buy prices and then break our heads to see how we run our house. That is a problem that is already solved with stores like Materialesdefabrica.com Once we know the type of heating that suits us best and adapts better to our budget, buy the heaters or the boilers What we need is just a click away.
There are different types of heating
But to be able to buy we have to know the types of heating for our home. We can divide them into seven large groups: 1- gas heating, 2- electric heating by accumulation, 3- electrical heating by convectors, 4- thermoelectric emitters, 5- underfloor heating, 6- heat pump and 7- boiler with Water radiator
1- Gas heating
Gas is the energy source par excellence. The most used around the world. And it can be used integrally in the home, that is, to heat the house, to cook or to have hot water in bathrooms and kitchens at home. They can be used for everything and, in turn, we can find 3 types: a- propane gas, b- natural gas and c-gas oil C
All three have advantages and disadvantages. The truth is that in a general way we can say that gas heating is a form of clean energy, very effective and that it does not pollute, but we must analyze each type separately.
Propane gas: it is more powerful than natural gas when it comes to heating. Although installing it is relatively simple and will be outside of our house, its disadvantage is that it always requires checking and checking the level of gas tanks to change and refueling whenever necessary. We must also bear in mind that when being in deposits and outdoors, it is necessary to be attentive to the state of the equipment for security reasons.
Natural gas: generates a very good heat and is one of the most popular. The gas will come from the outside to the house and therefore we will not need to worry about storage. But we must bear in mind that, if we live outside the city, it can be a little more complicated to have it since the supplies of this service are scarce when leaving the urban spaces. However, it is a clean heating energy and has an average cost.
Gas oil C: although it is a good source of energy to heat large houses, it is one of the most dangerous. The tacks that store it must be inside the house, it is a bit more dirty and contaminating and it is the most difficult system to install.
For any of the three we will need radiators to be able to get a homogeneous heat inside the house.
2- Electric heating by accumulation
A true classic, and one of the most used, especially in countries like Spain, Germany, Italy. The fixtures available for this fi transform electricity into heat thanks to the set of electrical resistances they carry inside.
To install these equipment, usually, is only to remove them from the box and plug in, unless we want to fix them to the wall. We can find a wide variety of equipment, very economical and that do not require any maintenance. They do not consume oxygen or emit polluting gases and the individual can take them with them to all the rooms of the house. They are perfect when we want to heat a specific place at a certain time. But, unfortunately, they do not serve to heat large environments and their consumption can be high. The latter is very important to take into account to avoid unpleasant surprises when receiving the bill for the consumptions made.
It is a very good heating system for areas where it is not very cold and for small homes.
3- Electric heating by convectors
Another very popular heating system, whose operation is through a resistance that heats the air passing through the convectors. It is a perfect system for houses located in warm areas and hot water is obtained by a thermos. Its installation does not require large works or works and is a very good way to have hot water at home. But we must keep in mind that having a medium to high consumption and depending on the cost of kWh can be very expensive, even when the system is not being used. Remember that the thermos will maintain the level of heat in the water all the time.
4- Thermoelectric emitters
Surely we have all had one of these at home sometime. They are the well-known oil radiators. Its system to transmit heat consists of a thermal oil that is heated by electrical resistances that are shielded in a special steel. Everyone that we have at home will be independent and we can connect anywhere and use them whenever we want. It does not require installation works, or pipes or boilers. Each of the devices usually have a thermostat and a programmer that help us regulate the heat and the time of use to save energy. The oil does not represent any risk and does not consume oxygen. Another of its advantages is that once we turn them off, they continue to radiate heat for several more hours until they are completely cooled. But, like all systems, it has a weak point and is that if the surface to be heated is very large, we will need many radiators and the electric cost will rise substantially.
5- Radiant floor
It is one of the best ways to heat spaces in the coldest climates and is considered one of the healthiest. This system consists of an electrical installation or pipes through which hot water circulates and which is located under the floors of the house. Its installation requires great works and a lot of work, but heat will be radiated throughout the surface.
It is a safe and very good system if there are children at home. But keep in mind that it requires a good initial investment and that requires lifting the entire floor of the house to install it. It allows us to save on electricity consumption (approximately 10% to 30%).
6- Heat pump
It is a system that we can use all year round, it will give us heating in winter and cold air in summer, all with the same device. It is a multipurpose system, of little cost to install it and that simplifies our life throughout the year. We will find a wide variety of brands, styles and capabilities. It is important to note that while reducing energy consumption, we need to change their filters regularly to avoid the accumulation of waste, mites and other particles that can cause allergies to family members.
7- Boiler with water radiator
The use of this classic heating system is widespread around the world. The heat of this type of heating is generated by burning a fuel such as natural gas in the boiler (located in a specific place in the house or building in which we live). It is this boiler that distributes the hot water to the radiators. This system is very good for heating from large to small rooms. And for its installation we will need large works for the pipes and the entire distribution system. But we must bear in mind that it is another of the systems that will give us one of the ways to heat healthier for our family.
Knowing which heating type suits us best, making our purchases will be much easier and just one click away.