Change the wallpaper in the work area

Learn in a few minutes to renew your work area at home without spending a lot of money.

Change the wallpaper in the work area

With a few materials that we usually have at home and perhaps buying some of the glues you need, you will be able to start with the renovation of the decor .
The materials you will need are these:

Change the wallpaper in the work area1

  • Remains of wallpaper you have at home.
  • Ruler.
  • Subway.
  • Scissors.
  • Cutter
  • Roller.
  • Cola for wallpaper.
  • Glue in spray.
And now we go with the step by step in a few seconds. If you have any doubts, we leave you the video so you can see it with confidence. It is undoubtedly a nice job to do at home and mix the DIY with the decoration.
First Step: measure the wall between the two bookstores and the height of these to know the strips of paper that you will need.

paso1_Change the wallpaper in the work area

Second step: cut the first strip of paper with the measurements, and the following taking into account the drawing so that later it marries.

paso2_Change the wallpaper in the work area

Third Step: extend the tail with the roller on the back of the paper. Ensure that the pasta is very well distributed.

paso3_Change the wallpaper in the work area

Fourth Step: glue the top of the paper to the wall and let the rest fall, taking care that the edge is stuck to the bookcase.

paso4_Change the wallpaper in the work area

Step Five: Smooth the paper with the help of a small brush, so that no air bubbles remain inside and allow to dry.

paso5_Change the wallpaper in the work area

Sixth Step: to work with libraries or libraries, you must measure the width and height, in this case, the back and the doors that you will wall.

paso6_Change the wallpaper in the work area

Seventh Step: mark the measurements on the wallpaper and cut with the help of a cutter all the strips you need.

paso7_Change the wallpaper in the work area

Eighth Step: impregnate the paper by the back with spray glue, since this is the most suitable for wood.

paso8_Change the wallpaper in the work area

Ninth Step: stick the paper to the door very carefully because with this glue it is not easy to rectify once placed.

paso9_Change the wallpaper in the work area

Tenth Step: repeat this same operation with the missing strip to complete the width of the door and the back.

paso10_Change the wallpaper in the work area

And now the video! It has been an excellent job to share with all of you !!!

Source: casadiez

Loading ..

Recent Posts

Loading ..